Views: 0 Author: Site Editor Publish Time: 2026-11-03 Origin: Site
From 10 to 12 November 2026, Rotterdam Ahoy hosts Intermodal Europe — three days when container lessors, depot operators, importers and modular builders are all in the same hall.
Shouguang Esen Wood Co., Ltd. will be at Booth H62 with the goods we manufacture ourselves: steel fittings for container doors, container floorboards cut on our own woodworking line, and conversion kits for turning boxes into usable space.
No appointment is needed. Walk in, pick the parts up, and judge the finish by hand.
## What we are bringing to Rotterdam
### Container door hardware and fittings
Lock rods, hinges, door gaskets, corner castings, ventilators, gooseneck tunnel parts and name plates for 20ft and 40ft containers.
The point of showing these on a table rather than in a catalogue is tolerance. Parts that arrive from four different suppliers rarely share one batch standard, and a door assembly built that way leaks. We cut these on our own tooling, so a rod, a hinge and a gasket ordered together are made to the same reference.
### Container floorboards
We are a woodworking company before we are a parts trader, and flooring is where that shows. Boards are cut to your panel size, with thickness held batch to batch, and the pre-drilled pattern matched to your fixing layout.
At the stand there will be offcuts, not just finished panels. You can look at the core, the edge and the hole spacing — the three things that decide whether a floor lasts in service or comes back on a repair list.
### Container conversion kits
For teams turning boxes into site offices, storage or welfare units: doors, windows, insulation, electrical components and sanitary modules, specified against your drawing rather than picked from a catalogue page.
Kits are assembled as one purchase order instead of six, which is usually the difference between a conversion finishing on schedule and waiting on a missing window frame.
## Why this is worth a walk to H62
Three things are hard to judge from a PDF.
Plating and weld quality. Hold a hinge up to the light and the difference between a properly finished part and a thin coating is obvious in seconds. On a spec sheet, both look the same.
Gasket section. A door seal either has the profile that suits your frame or it does not. Squeeze it and you know.
Panel core. Flooring failures usually start inside the board, not on the surface. A cut edge tells you more than a data sheet.
## Who should stop by
- Container lessors and depot operators — bring a repair list or a photo of one. We will tell you which lines we can supply together and which we cannot, on the spot.
- Importers and distributors — bring your target specification and annual volume. We will talk about what can be mixed in one container, not about how large our factory is.
- Container conversion and modular builders — bring a drawing. The useful conversation is about fit and sequence, not about catalogue numbers.
## Practical details
| | |
|---|---|
| Show | Intermodal Europe 2026 |
| Dates | 10–12 November 2026 |
| Venue | Rotterdam Ahoy, Rotterdam, Netherlands |
| Booth | H62 |
Conversations are in English or Chinese. Samples stay on the table for the full three days.
## FAQ
Do I need to book a meeting?
No. Walk in during show hours. If you want a specific person from our team, write to [EMAIL 待确认] before 9 November and we will make sure they are at the stand.
Can you quote from our repair list?
Yes. A photo or a PDF is enough. We will tell you what we can supply from stock and what has to be produced.
Which container sizes do your parts fit?
20ft and 40ft containers. Bring your spec if you are working with anything outside those.
Do you send samples before the show?
Sample arrangements differ by part. Ask at Booth H62, or write to [ginna@esenwood.com] with the part number.
## Visiting us
Intermodal Europe 2026 runs 10–12 November at Rotterdam Ahoy. We are at Booth H62 for all three days.
If you are planning your route through the hall, H62 is the stop where you can handle the parts instead of scrolling past them. Bring a repair list, a drawing, or a question you have not had a straight answer to.
